- Metal Crafts[10]
- Spray Gun[10]
- Ball Screws[10]
- Screws[2]
- Titanium Sheets[4]
- Titanium Wire[3]
- Titanium Pipes[1]
- Titanium Foil[2]
- Cast & Forged[10]
- Power Distribution Equipment[5]
- Laser Equipment[2]
- Other Chemical Equipment[4]
- Suspension System[9]
- Truck Suspension[1]
- Motorcycle Shock Absorber[1]
- Shafts[4]
- Wrench[3]
- Bushings[2]
- Other Motorcycle Parts[2]
- Casting Services[1]
- Flanges[1]
- Sheet Metal Fabrication[2]
- Other Metals & Metal Products[1]
- Material Handling Equipment Parts[1]
- Hydraulic Parts[1]
- Transmission[1]
- Steering System[1]
- Chains[10]
- Other Hardware[10]
- Other Fasteners[2]
- Machining Services[5]
- Other Mechanical Parts[1]
- Hooks[7]
- Contact Person : Mr. Song Chaopeng
- Company Name : Shaanxi Allstate Tech. & Trade Co., Ltd.
- Tel : 86-29-88455958
- Fax : 86-29-88451053
- Address : Shaanxi,Xi'an,D-1804 Van Metropolis No.35 Tangyan Road, West Hi-Tech Development Zone,
- Country/Region : China
- Zip : 710065
Truck Air Bag Suspension
Truck Air Bag Suspension
H series Air spring: BELLOWS : Wall gauge is approximately 5 mm. GIRDLE HOOP: Wire wound type shown, molded into the bellows.BEAD RING: upper and lower. countersunk steel type shown. May also be of a second stamped steel variety or made of aluminum.AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.BOLT: M10 x 45 mm Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing of the forces or loads involved
K series Air spring:BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved.AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
ZF series Air springBLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
CY series Air springBLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
Your friendly enquiry would be highly appreciated.
Truck Air Bag Suspension